Sanwa Supply ADR-3TCMS6BK Type-C Compact Card Reader, Supports SD/Micro SD Cards

Card Reader for both TYPE-C and USB A Equipped with a USB Type-C connector and a USB A connector, it can be used with other smartphones and tablets that support Type-C as well as computers. Comes with 2 caps to protect the connectors on both sides from dust. ● Card reader using the latest standard USB Type-C connector. Supports USB 3.1 /3.0 (5 Gbps) (theoretical value). Data transfer rates may decrease on devices without USB3.0 Gen1 (USB 3.0). The USB Type-C connector is a convenient connector that can be inserted either the front or back. Supports SDXC memory cards (UHS-I and UHS-II) 256 GB. It is not compatible with UHS-II high-speed transmissions. This is a bus power type that does not require a power supply. In order to be used as a USB 3.1 Gen1 (USB 3.0) device, it must be a host adapter that supports USB 3.1 Gen1 (USB 3.0) or a device equipped with a USB Type-C compatible port. It is not compatible with USB 3.1 Gen2. USB 3.1 Gen1 is the same standard that USB 3.0 has been renamed by USB IF (USB Implementers Forum). ■Interface: USB Ver.3.1 Gen1 Compliant (Backwards compatible with USB Ver.3.0/2.0) ■Slot: 1 x SD Memory Card Slot Micro SD card slot x 1 ■ Size: W80 x D20 x H11.2 mm ■Weight: Approx. 12 ■Current Consumption: Operating Time: 200 mA (MAX) Standby: 40 mA (MAX) ■ Environmental Condition (No condensation): Operating Temperature/Humidity: 32°F - 104°F (0°C - 40°C), 0% - 80% Storage Temperature: 32°F - 104°F (0°C - 45°C), 0% - 90%

• It has a USB Type-C connector and a USB A connector, so it can be used with smartphones and tablets that support Type-C as well as computers. Includes 2
• caps to protect both sides of connectors from dust and debris. This card reader uses the latest
• standard USB Type-C connector. Supports
• USB 3.1 /3.0 (5Gbps)(theoretical value) transfer speed. The
• USB Type-C connector is a convenient connector that can be inserted both front and back. Supports 256GB SDXC memory cards (UHS-I and UHS-II). This is a bus powered type that does not require a power supply. Interface: USB Ver.3.1 Gen1 Compliant(Backwards compatible with USB Ver.3.0/2.0). Slot: SD Memory Card Slot 1 Micro SD Card Slot 1. Size: W80 D20 H11.2mm